Hurri-Bolt Uplift & Tie Down Systems
Hurri-Bolt Uplift & Tie Down Systems
This page contains the following topics: (Click on any topic to view it's contents)
Return
to our Building Products Index page from here
"The Truss and Top Plate Tie-Down Systems That Will Blow You Away!"
Hurri-Bolt, Inc.TM Uplift Solutions
It is with great excitement that we introduce to you a one of a kind truss tie-down system for wood frame construction. After asking questions of builders and several months of vigorous testing, finally there is a revolutionary product on the market that benefits not only builders but also developers, architects, engineers, and framers alike. The Hurri-Bolt Truss Tie-Down System ties the trusses of a structure to its concrete foundation with incredible force through a series of manufactured steel rods and aircraft cable. The Hurri-Bolt Top Plate Tie-Down System anchors the top plates of a building to the foundation with manufactured steel
What This Means to You!
- Eliminate 95% of all hurricane straps, clips, and strap nails!
- Greatly reduce labor time and expense.
- Eliminate hours spent shuffling through catalogs looking for the right strap.
- Cut down on product waste in the field.
- Simplify the inspection process.
Top Plate Tie-Down
|
Rod Spacings (inches) 48" 64" 72" 96" Wall Type Uplift per Truss on 24 Centers (lbs.) Typical Wall 1950 1463 1300 975 Party Wall 975 731 650 488
|
Girder Tie-Down Rod Diameter Capacity * (lbs.) 3/8" 2405 1/2" 4010 5/8" 7050 3/4" 10305 *Refers to Direct Connection to a Girder Strap |
Truss Tie-Down
HURRI-BOLT TYPES
Hurri-Bolt Cast In Place Anchor Hurri-Bolt Epoxy Anchor
More Hurri-Bolt Tie Down System Products Available
Top Plate Connection features a square washer sized to the bearing capacity of the top plate species. The final step to complete installation is to tighten the top nut above the washer
HURRI-BOLT TOP PLATE ROD, HBT
1/2" - 13 tpi x 6' all thread rod made of C1008 material. This top most piece is inserted through the top plate. The rod is cut to length in the field allowing a minimum of 1" to stick above the top plate for the washer and nut.
HURRI-BOLT COUPLING NUT, HBC
1/2" x 1 3/4" coupling nut manufactured with a stopin the center allows for perfect engagement when connecting rods. The coupling nut can be visually inspected by verifying 3/10th's of thread above and below.
HURRI-BOLT ROD, HBR
1/2" - 13 tpi x 6' all thread rod made of C1008 material. This top most piece is inserted through the top plate. The rod is cut to length in the field allowing a minimum of 1" to stick above the top plate for the washer and nut.
1/2" x 12" x 2" Anchor bolt made of ASTM 193 Grade B7 Steel and bent at a special angle for ultimate pullout.
1/2" x 9" anchor made of Heat Treated Steel with an impact wrench.
ELIMINATES EPOXY!
The Differences Between the Hurri-Bolt System and other rod systems are many.
POSITIVE STOP HURRI-BOLT
First we are the only system that uses a double-end stud. The smooth shaft prevents scuffing of the insulation on any cables pulled through the wall cavities.
Second, our coupling nuts have a positive stop in the center. This prevents the rod from over turning the center of the coupler, which means perfect engagement every time.
The one inch of thread and the positive stop allows our couplers to be visually inspected, since 3/10th's of an inch of thread is visible above and below the coupler. Next, our standard rod length is 6'. This makes installing rods in walls with mid-blocking a snap.
HURRI-WEDGE ANCHOR SYSTEM
MATERIAL .
